[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Fan Pulley Degrees (was Re: [T3] Some carb or ignition problems...)


on 17/9/2002 10:11 AM, Mark Fuhriman at mfuhriman@earthlink.net wrote:

> I think this applies to all years:  The fan pulley diameter is about 8-5/32
> inches.  This works out to .071"/deg (1.8mm/deg) along the circumference.  Use
> this relationship to find whatever degree you want around the pulley.  If you
> want 28 degrees, measure out 2" from the TDC mark and put a dab of white paint
> there (Liquid Paper is handy) so you can see it under the strobe.

OK, thanks!

Ben Doughney

'75 1200L
'63 1200 - Ringo
'71 1600TL

http://members.tripod.com/~superkafer/ 


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]