[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Worn lifters will be dished... and MUST go back in the same location if you reuse them. inspect the cam carefully... if you expect 100K from your rebuild Id be very cautious about reusing the old cam. keith > For my stock rebuild for my 66 Squareback, should I spring for new lifters > or reuse the originals? I am going to reuse the cam. It checks out fine. > > What should I look for on the lifters to see if they are reusable? Is there > a risk of making the cam flat if I go with new lifters and the metallurgy > doesn't match up? Getting ready to order parts would like some opinions. > > Thanks. > > > Later, > John Jaranson > '71 FI AT Fasty (Jane) > '66 Square (Sophy) > About Half a Late Square (Organ Donor) > http://mywebpages.comcast.net/jaransonT3/jaransonT3/ (This is my new > website address) > > ------------------------------------------------------------------- > Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe > > </x-charset>