[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: RE: [T3] fuel pump woes


You can clean the pump by removing the 4 screws, be careful not to loose the little cylinder shaped pins that are in there. It will expose a small hole that is just the right size for a b12 nozzle. Spray it til it runs clean. Pay special attention to the position of the large washer between the nozzles and pump body. This process got mine started after 15 years of sitting...The one thing to note though, is if you remove the silver cap,inside is a piston and spring held together by rubber, mine separated when I did this and ended up finding a used one to replace it anyway.
Robb

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]