RE: [T3] Outer window scraper replacement

["nathan howell" <orntar@worldnet.att.net>]

http://store.cip1.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=cali&;
Product_Code=A48-8382&Category_Code=02-06-01-02

here is some rubber on cip1.com. it is the german stuff too. but you do
have to reuse the original trim pieces.

-----Original Message-----
From: Jim Adney [mailto:jadney@vwtype3.org] 
Sent: Wednesday, March 20, 2002 7:31 pm
To: type3@vwtype3.org
Subject: Re: [T3] Outer window scraper replacement

On 20 Mar 2002, at 19:27, Type 3 Junkie wrote:

> So i need to bite the bullet here and replace the outer window scraper
on 
> the 66, 68, and 69..so i figure by the end i should be really good at
this. I
> have figured out how to do it ...i just need the right parts I know
that the
> rubber can be replaced (i have the article from Hot VW) But i would
rather just
> replace the entire assembly as the chome now isnt in that good of
shape anyways.

Good luck. I don't know anyone who has seen a new one in the last 20 
years. All the repairs I know of use some kind of makeshift replacement.
I 
have a few decent used trim frames, but I don't think the rubber in them
is 
anything special.

-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe