[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] put dat sucka in...


Ok, getting close...
    The engine is just about ready to go in the car.  (67 1600cc, dp, dual 
carb, stock) everythings been installed except the spark plugs...  Ive read 
what Bentley and Haynes have to say about reinstalling, but is there anything 
else i should do before the engine goes in?  Keep it straight, dont damage 
the trans input shaft, dont jam the carbs on the way in.  Im just trying to 
make sure i dont get too excited and forget anything.
    Also,  when i crank it for the first time, with no spark plugs and with 
no oil pressure switch, would it be fine if i leave the stock air cleaner 
off?  I would imagine so, and it is easier to get to the oil pressure switch 
without the air cleaner in the way.
    Before the engine does go in, i do need to get a new battery and make 
sure the starter whirrs when i turn the key.  and soon, ill have to find a 
replacement for the horrible rusted stinger exhaust.

*Jerrod*
cant wait to drive it cant wait to drive it cant wait to drive it

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]