[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] TDC issues


<x-charset iso-8859-1>I go for the middle, but it does not necessarily have to be THAT precise, we
aren't talking position down to the micron or anything like that. The body
of the dist will move relative to the shaft when setting the timing, so you
will change whatever you set initially that way.

----- Original Message -----
From: <I4VW@aol.com>
To: <type3@vwtype3.org>
Sent: Tuesday, March 12, 2002 7:44 PM
Subject: Re: [T3] TDC issues


> In a message dated 3/12/02 3:35:22 PM Eastern Standard Time,
> vw_type3@hotmail.com writes:
>
> > As for the dist yea the rotor should line up with the mark on the dist
> body.
> ------------
> Is this the leading edge, the middle, or trailing edge of the rotor that
> lines up on the mark?
>
> TIA,
> Tom
>
> -------------------------------------------------------------------
> List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org
>
>

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]