[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>I Didn't get static timing setting, as it's a 72, but seems close enough to run statically checked. IS there a static point to >>begin with on a 72, then set correctly ala bentley? Bentley doesn't give a static timing, but it should come out between 0TDC and 5BTDC(per Jim A.) statically. I tested this on mine by timing dynamically then checking the static mark, it was 0TDC. It has worked out fine for me. >>Is it posssible to test fuel pressure from cold start injector hose? This is where I have mine since I don't have my CSV connected anyway. >>I don't seem to have the fitting on the driver side Bentley shows on the 72, unless they mean removing the screw from the >>FI hose manifold there. Yep that's it. Jason Smith '72 Fastback FI AT http://jasontsmith.tripod.com/vw.htm ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/