[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>You should be able to tighten the ball connection by peening the "rivet" with a ball peen hammer. Thomas E. Potter Technical Specialist II Telephone: (713) 215-2877 Fax: (713) 215-2551 E-mail: tom.e.potter@williams.com -----Original Message----- From: Henrik Larsson [mailto:notchback@home.se] Sent: Sunday, July 21, 2002 3:36 AM To: type3@vwtype3.org Subject: [T3] 1964 Notch passed the safety inspection I also found that the "ball part" on the throttle arm of the left carb was loose. It is riveted to the arm and I was not able to repair it. A spare 1966 carb donated its throttle arm. Henrik Larsson, Sweden 1964 and 1968 Notches ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-charset>