[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>ANY bent is too bent... they are cheap and plentiful though. Keith Keith Keith Park Top Notch Restorations topnotch@nycap.rr.com 71 Squareback 65 Notchback 65 Squareback 75 Opel 87 Golf 88 Rx7 10th Anniversary ----- Original Message ----- From: "The Canadian" <cndt3@shaw.ca> To: <type3@vwtype3.org> Sent: Friday, July 19, 2002 8:39 PM Subject: [T3] Bent Tie Rod (was [T3] Early tie rod end) > First of all thanks to Dave and Henrik, the tie rod ends for early cars are > indeed the same as the 64-67 models. Now that I have them installed I have > found that tthe long tie rod is somewhat bent. When twisting it to do the > alignment there is a noticeable bend just before the tie rod end. When > rotating the rod the tie rod end at the wheel fluctuates up and down maybe > as much as 1" (total) through the range of the rotation. > > How bent is too bent? > > Andre > > > > > ------------------------------------------------ > To unsubscribe, E-mail to: <type3-off@vwtype3.org> > For more help, see http://vwtype3.org/list/ > ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-charset>