[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2002-07-05 at 10:25, jason.smith@sarcom.com wrote: > > Hello, > Is there an easy way for me to tell if my car has been lowered? Like a > measurement from the ground etc? The reason I ask it that it seems to be > uneven in the front end. If you measure the distance from fender to tire on > each side they are different by about 1/2 inch. Or could this be some > sagging part on the front end, bad shock, two different shocks? When I push > on the front end it bounces nicely without any noise, clunking etc. But > something does not seem right. Any ideas? > The only true way to be sure, is to measure it with the factory protractor. As shown in the Bentley. Another way is to do some measuring and compare it to someone else's car with the same size tires. -- Russ Wolfe '66 FB MT (It drove) '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/