[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 25 Jan 2002, at 19:45, Daniel Baum wrote: > I may take you up on that, but in the meantime I can use my original lever, > and I would like to try to find out what kind of button I have. It has > "castellations" around the bottom, so that it is wider at the end with the > thread than at the other end. It will fit if you put it in the wrong way, > and then the castellations prevent it going all the way in. It seems like if > you could remove the plastic grip from the lever, you could then install the > button and replace the grip over it, and the grip would help keep the button > in, as well as the thread. Is the grip removable? The buttons I've seen were all smooth on the OD, but I get your picture. Yes, the grip comes off, but with difficulty. The little white plastic piece has to be lifted while you pull. Takes at least 3 hands, some fancy language, and just the right position of the tongue. ;-) - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/