[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Jan 2002, at 18:01, Russ Wolfe wrote: > And what gaskets do you have between the intake manifold, and the head?? If it > is the metal one that comes in a gasket set, for the dual port heads, that is > wrong. The proper gasket for a T-3 dual port, whether it is carb of FI, is the > plastic/fiber gasket about 3/16" thick with paper on each side. That gasket is for FI only. The carb manifolds used a simple paper gasket below the manifold, but there was a thicker plastic insulator above the manifold, between the manifold and the carb. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/