[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Brake Caliper Rebuild Question


<x-charset ISO-8859-1>Hrmmm, I rebuilt mine a LONG time ago and I didn't use compressed air.
Trouble is, I don't remember how I did it...  Not much help, I know, but it
can be done, I know :)

   Toby Erkson
   air_cooled_nut@pobox.com
   '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed
   '95 VW Jetta III GL 2.0L, P-Chip, Jamex suspension, 2.25" MagnaFlow
exhaust, etc.
   Portland, Oregon, http://www.icbm.org/

>-----Original Message-----
>Before I started to rebuild my brake calipers I decided to read the
>procedure thoroughly.  It says that you need compressed air to remove
>the pistons and a special took to get them back in at the right angle.
>
>I don't have a compressor or the special tool.

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]