[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] pop rivet floor pan/new rear cylinders


<x-charset iso-8859-1>well i took today off of work to work on the squareback i recently
received...leaky wheel cylinders were the first problem to attack. NEw ones
came in the mail today, pop the old ones off-(broke one of the lines, the
metal line between the wheel cylinder and the rubber line so i needed to get
a new line-from FLAPS). And when I went to the drivers side wheel i found no
brake shoes at all, well i guess the shoe was there-just the metal part, but
none of the pad. cant get those until monday or tuesday-so ill try to finish
it then. not as hard as i thought for my first time.

i fixed a ground on one of the reverse lights-that works now. changed the
spark plug wires, new contacts, new rotor and new distributor cap. now i
need to get back to that wiring mess under the dash. headlights working, but
the high beams don't. the relay appears to be working because i hear a loud
lick when i hit the high beam switch. a spaghetti of wires under there. does
anyone know if the wiring diagram for a '66 is the same as for a '67? i
could only find a '66 diagram and it looks to be the same so i am using that
as a basis for my wiring.

thanks

-kevin
somerville, ma
'-67 sqbck
-'65 kombi

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]