[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Mon, 2002-04-15 at 22:01, nathan howell wrote: > > >Measure the resistance of the #1 SP wire. If it is infinite, replace > the >bakelite SP connector, which should measure ~ 1000 Ohms. > > Not sure what you mean here, they are copper core empi spark plug wires > and are new, resistance across 1 wire is 0.7 ohm. Are the stock ones > special? > .7 ohm could be a problem. You have no noise suppresion!!!! The Bosch wire were solid copper, but the ends had a 1000 ohm noise suppression resistor built it. The rotor should have 3-5K resistance also. All solid wires are fine if you are carburated, and don't want to listen to the radio. -- Russ Wolfe '66 FB MT (It drove) '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe