[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 13 Apr 2002, at 11:28, Drake wrote: > > Does your breather box have 1 or 2 plastic plugs on top? > > One > > Does your oil filler > > pipe have a short stub pointing upward just outside of where it bolts to > the case? > Yes > > > Is there a steel tube that attaches to the front cover of the intake air > > distributor and wraps around the IAD and comes rearward along the lower > > right side of the IAD? > > No. Okay, good, this is the simpler 68-71 system. > > How much stuff did you transfer to the new engine from the old one? > > Everything > > Have you measured the compression? This was lowered on 72-3 engines. > > Yes, I dont remember the exact number right now, but it was about 110-120 I > believe That's fine. > Oh one last thing...I took the pressure sensor out this morning..to see if > there was a bosch pn on the outside anywhere...unfortunately the only number I > found was 030. Does this mean anything? its on the top, front side of the > sensor. That doesn't mean anything to me, it may be the Bosch date code. The part # should be stamped on one of the rounded sides. On original units and units purchased thru VW there will also be a VW #. It may be hidden under dirt or undercoating. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe