[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Sep 2001, at 22:20, Daniel M. Hoopes wrote: > can you see any coolig problems with just cutting the hole out? er, > wait, if it's just the parts that screw on, then maybe i can just use > my old screw-on parts and the bigger peice from the salvage tin. no > other little changes, like directional stuff, huh? I'd check the spacing between the mounting holes for the little bolt- in parts. If they are the same then just reuse the little bits and refinish the big parts. If the spacing is different, you will have to braze in new nuts for the bolts after you cut away the hole. OTOH, I have good black refinished FI sheet tin which is almost exactly the same as the 67 dual carb tin. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe