[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I have with their Cockpit style. Fit's in like it was made to :) You can sort of see it here: http://www.icbm.org/erkson/personal/gbmc/36-home.jpg BTW, that's Brian Fye at the wheel (and look at where the needle is on the speedo!). Here's an older picture (that's the STOCK carpeting...29 years of daily-driving use!): http://www.icbm.org/erkson/personal/front_interior.jpg Shoot, I don't remember the diameter to get...I *believe* I measured the clock body diameter and bought the VDO that was closest to the same size. Toby Erkson air_cooled_nut@pobox.com '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed '95 VW Jetta III GL 2.0L, P-Chipped, Jamex sport suspension Portland, Oregon, http://www.icbm.org/ >-----Original Message----- >Does anyone know if the tach in the vdo series one set fits into the >clock area on a 71 squareback? This set looks really sweet and i >don't think that the tach would look out of place with the other >stock gauges. had anyone done this with this gauge set? ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/