[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Now that it is running.


Probably not, there is no way for it to get loose unless something is wrong,
my guess is that the solder seam on the bellows gave out and it became a 2
peice unit that is now unsealed.

Why do you think its lean? how can you tell? check your sensors or get a
good pressure sensor on there.  Trying to fix it by adjusting something out
of spec will create other problems and wont work.

Keith


----- Original Message -----
From: Mark Healey <marksvw@healeyonline.com>
To: It's a list <type3@vwtype3.org>
Sent: Thursday, September 13, 2001 2:30 PM
Subject: [T3] Now that it is running.


> I got the FI in my 71 square working.  Now it is running lean and
> hard starting.  I'm tempted to put in my old tampered pressure sensor
> or turn up the fuel pressure.
>
> Another thing.  My first untampered pressure sensor was bad.  When I
> took it out I heard clanking inside.  I figured "what the hell" and
> opened it up.  The copper flangy thing was skewed and loose.   I put
> it in what appeared to be the right position and reassembled.  No
> clanking.  Should I consider it good?
>
> Mark Healey
> 71 FI auto square
> 71 FI manual square
> marksvw@healeyonline.com
>
>
> -------------------------------------------------------------------
> Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe
>
>


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]