[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> The problem was that the cover plate was stuck tight Maybe the nuts had spread the plate a little and it was locking into the threads. You might find replacing the centre bolt and wiggling that with the socket would loosen it enough to remove it. This would save risking damaging the filter gauze edge with a pry-bar or screwdriver. Of course, maybe someone used gasket cement on all the faces! You could be quite aggressive cleaning it off the plate, but the filter screen will need replacing if the gaskets are glued on. You will need to take care with the crankcase too. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe