[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Oil cooler


Jim,
essentially the washers would/could make the eng be
restricted from oil flow or make the leak just as bad
or worse? That bites. I am glad you told me. So the
contact between the cooler and the case alone by way
of the seal is suffice? 


--- Jim Adney <jadney@vwtype3.org> wrote:
> With an early cooler and a late case you need the
> green adapter 
> seals and NO spacers! You have my FAQ on this, don't
> you?
> 
> I don't know if there is a torque spec on these, but
> there probably 
> is. If there is, it will be too small for most
> torque wrenches. 
> Basically you just tighten them down with locktite
> on the threads 
> until you just feel the metal parts bottom out
> against each other.
> 
> Remember, green adapter seals and NO spacer washers!
> 
> -
> *******************************
> Jim Adney, jadney@vwtype3.org
> Madison, Wisconsin, USA
> *******************************
> 
>
-------------------------------------------------------------------
> List info at http://www.vwtype3.org/list or
> mailto:help@vwtype3.org
> 


__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]