[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 8 Oct 2001, at 1:07, Chazpix@aol.com wrote: > I'll check the connection at the switch-good idea Russ. As far as throwout > goes-maybe adjust in a couple of turns? Check the return spring on the side of the tranny. These are often broken and will allow the TOB to rub. I also makes proper adjustment of the free play impossible. > Had similar simptoms before I went to12v too-check that the VR is grounded > well, and maybe pop the top & check the points to see IF it's as clean as it > looks! They're always cleaner inside than out. I think Bosch even paints a bit of dessicant inside to prevent water damage. Breaking the seal is usually counterproductive. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org