[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Generator Part 2


<x-charset iso-8859-1>On Tuesday 13 November 2001 16:22, JaransonT3@aol.com wrote:
> Well, I removed my whirring generator and replaced the bearings with sealed
> units.  Bearing number 6202 with a 15mm I.D.  About $15 a pair.  The
> rebuild went pretty good.  I cleaned out a bunch of dirt and grunge and
> reasembled.\
>
> Installed the generator tonight and now it is not generating.  I am going
> to go through the diagnostic in Muir and Bentley, but anyone have any
> insights on what to check.  I will post what I find later.
>
Did you forget the screw that goes in through the end plate into the brush 
holder plate?? They don't work if that screw is missing.

PS: I got your package today. Thanks.
-- 
Russ Wolfe
'71 Fastback AT
'66 Fastback MT (IT RUNS)
russw@classicvw.org
http://www.classicvw.org

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]