[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Engine Questions


ok this is the specs on my motor 
i have 88mm machined in pistons 69mm crank 1679cc
mabey that will help some

67 Baja Bug
72 Bug
73 Squareback
73 Squareback
http://type3.cjb.net

PGP : 0xA69E66DB
----- Original Message ----- 
From: "Jedediah Millheiser" <jmillheiser@yahoo.com>
To: <type3@vwtype3.org>
Sent: Tuesday, March 06, 2001 6:34 PM
Subject: Re: [T3] Engine Questions


> is that 88mm X 88mm?  that is a funny size?  any
> clearance problems?  the engine i am looking to build
> is 90.5 x 78(2007cc).
> 
> i could see the small bore big stroke being good on an
> off-road engine.  lotsa tourque.
> 
> the engine i want to build is going to be a fast
> street engine.
> 
> 
> 
> --- Ron Arnold <dwg-marlboro@stones.com> wrote:
> > my baja is around 1700cc with 88mm jugs and 88mm
> > drop in pistons, i use it
> > as a everyday driver sweet driver hell of a mudder
> > ,use's a Zenith 32 carb
> > 
> > 67 Baja Bug
> > 72 Bug
> > 73 Squareback
> > 73 Squareback
> > http://type3.cjb.net
> > 
> > PGP : 0xA69E66DB
> > ----- Original Message -----
> > From: "Keith Park" <TopNotchResto@worldnet.att.net>
> > To: <type3@vwtype3.org>
> > Sent: Monday, March 05, 2001 7:12 PM
> > Subject: Re: [T3] Engine Questions
> > 
> > 
> > > 1776 is a bit too big for total longevity... but
> > stroking it is
> > OK...SSO...
> > > go 88mm jugs and a stroker crank if you can afford
> > it.
> > >
> > >  and STAY INJECTED!!
> > >
> > > Keith
> > >
> > >
> > >
> >
> -------------------------------------------------------------------
> > > Pitch in!  Send your pledge of support! 
> > mailto:support@vwtype3.org
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail. 
> http://personal.mail.yahoo.com/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]