[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You will also have to modify the fan shroud as well. When I was fitting things, it appeared I wouldn't have to. But now that everything is going together, I need to cut a small hole in the fan shroud to allow the mounting stud and part of the line fittings to protrude through. I should be able to cover up the holes with JB weld or something. If I had been using a smaller oil pump (ie. 21mm vs. my 26mm) I probably wouldn't need to do this. Joe Plowick My Site: http://type3lvr.homestead.com ----- Original Message ----- From: "Herman Haustein" <haustein@netvision.net.il> To: <type3@vwtype3.org> Sent: Saturday, June 16, 2001 9:38 AM Subject: Re: [T3] Those with Gene Berg full-flow kit - Question > Doesn't the Pressure relief cover demand more grinding of the rear > crossbar, as opposed to the single outlet cover. > > Herman > ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe