[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 15 Jun 2001, at 11:57, shackedup wrote: > It looks as though sleeving 2 front wheel cylinders will run me over $200 > CNDN so I will investigate other options. Wow!!! Have you checked with more than 1 place? I would think it should be much less than this. > Now, the silicon fluid that leaked out of the wheel cylinder has soaked my > lower brake shoe. Am I correct to assume that there is nothing on the face > of this Earth that will clean it up? Good question, and there may well be no good answer. You might try a automotive paint supply store to see if they have a silicone solvent. I suspect that you really don't need to get these all that clean. Just clean off the drum, hardware, and backing plate, and the surfaces of the shoes. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org