[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] master cylinder question


On 11 Jun 2001, at 8:43, Mark Fuhriman wrote:

> Careful here.  It seems like a couple of years ago we decided here
> that there is a typo in the Bentley on the pushrod clearance.  Again,
> I'll have to check my notes.  You really need to do your adjustments
> with the bolt on the floor.  You can't adjust the pedal freeplay
> properly by monkeying with the pushrod length.  

The typo was in the stated nominal pushrod length; the error is 
rather obvious, however, because it is quite large, around 10mm. 
The clearance is correct. 

Yes, absolutely, the correct way to adjust the free play is with the 
pedal stop.

-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]