[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Here is a god link for you. This is about lowering it. Just reverse the actual part and you are good to go. http://www.vwfastback.com/type_3_lower.htm Steve Waters http://www.sevwc-cga.cjb.net 68 Fastback 2275 00 Turbo Beetle -----Original Message----- From: Russ Wolfe [mailto:russella@prairieinet.net] Sent: Friday, July 27, 2001 8:56 PM To: type3 Subject: Re: [T3] back to stock hieght Subject: Re: [T3] back to stock hieght > i discussed a flat bed but I was told getting it up there would scrap my rear > apron.... > Raising or lowering a T-3 is not as easy as it sounds. It is a matter or pulling all the torsion bars, and resetting the splines. Have you considered using a "toter/dolly" <sp>. Just get the front wheels up onto it. Might have to jack it up to get it on if it is that low. If it a an automatic, drop the rear drive shafts. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org