[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> just remembered some ball joints have a flat side on them this means youi > can hacksaw the nut off without touching the threads on the ball joint just > saw allong side the flat on the threads! > neil verdon 66 sqr on irs pan Good thinking Neil; they all have two flat sides in line with the arm, so they fit through the oval hole in the torsion arm which stops them rotating! Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe