[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 1 Jul 2001, at 22:45, Alex wrote: > Just wanted to know if anyone had the part number or had a source for > obtaining the part that holds the engine lid up on a '70 Square. On > the lid itself, there is a loop/hook that looks like there would be a > strap of some sort that attaches to the rear of the seat. Otherwise > the lid just kind of leans back and stresses the pivot points on the > base. The hook just attaches to the rain gutter almost straight up. You're right, if you leave the tabs in the holes when you let the cover lean all the way back it will just bend the anchor points. The cover was never designed to do that. This may be an oversight, but the best thing to do is simply remove the cover from the car if you need to work in there. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe