[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Oil temp sender (was: Gauges)


On 29 Aug 2001, at 18:59, Joe Plowick III wrote:

> My dilema was choosing between the two mounting points.  In the T-1
> location, it's in the main oil galley right after the pump and before
> the cooler.  The T-3 location is on the output side of the oil cooler.
>  So I wanted to mount the oil pressure in the T-1 location to get the
> output pressure from the pump.  Then mount the oil temp in the T-3
> location after the cooler so it reports the temp of oil going to the
> rest of the motor (obviously after warm-up).

Why not put them BOTH at the oil cooler so they BOTH get 
measured just before they head inside and get to work?

-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]