[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Still Can't Get Right With The New FI Parts In.

On 16 Aug 2001 16:43:42 -0700, Mark Fuhriman wrote:

>Mark, maybe you should give a quick summary of the troubles (if you have recently I
apologize..).  From what I recall, you have put things back together and you seem to
have symptoms that point toward rich fuel mixture.  You have verified that the regulated
voltage is good.  Here's what I'd look at next:
>o Plugs black and gunky?  All of them?  Do they all look the same?

They looked OK before I put in the new parts.

>o Fuel pressure around 30psi?


>o Valves and timing adjusted OK?


>o Leaky injectors?  Leaky cold start valve?

I haven't changed those.

>o bad or out-of-spec pressure sensor?

Changed it to one that hasn't been tampered with.

  Can measure resistances of primary and
secondary windings.  See Bentley for values.  Is that hose in good shape and


>o bad or out-of-spec temp sensor?  Measure resistance and compare value with

Haven't changed that.

The parts that I've changed are the ECU, pressure sensor, throtle
valve switch and the wiring harness.

I figure It's got to be one of these.

Mark Healey
71 FI auto square
71 FI manual square

Search old messages on the Web!  Visit http://www.vwtype3.org/list/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]