[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 7 Aug 2001, at 15:56, Per Lindgren wrote: > BTDT!!! I took a generic 8mm bolt, cut it to proper length to fit the cooler, > fastened it in the chuck in the power drill, and worked on it with a metal file > while it spun @ 3000 rpm. When it was down to 6.1 mm I threaded it with an M6 > thread cutter. Now I had a nice adapter that both fit the new Brasilian case and > the type3 oil cooler. Nice work! You've made yourself a step stud. These can be purchased, but I really don't know where. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/