[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 Aug 2001, at 16:19, Square67@aol.com wrote: > I had the same problem a few years back with my 69 fasty, my problem was that > my switch was shot. mabey you can try bleeding your brakes. I beleive later > models have a back up switch in cas one half of your dual circuit master > cylinder goes out. how are your brakes otherwise?? if your brakes are fine > then you need to take a look at the switch. Its on your master cylinder, take > a look at it and go from there. most of the manuals explain this in great > detail. There are 2 switches from 67 on, although they changed from 2 pin to 3 pin in 70. 67-69 may be changed to the late style by now. In either case, if you're having trouble with the lights now it means that one switch is dead and the other one is dying. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe