[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] oil pump question


On 28 Apr 2001, at 21:36, scott lawless wrote:

> okay then, it's really a good thing i came in and
> emailed ya'll first. i was about 5min away from the
> prying thing. so are there any other surprises that i
> need to watch out for when i split the case? btw: if
> the case halves don't readily split, do you suggest a
> wood block and a mallet?

First off, make sure you get ALL the bolts and nuts off. As many 
times as I have done this, I still usually miss the little one that is 
usually hidden in grease below and in front of the #1 cylinder.

> oh, and another thing. the front half of the fan duct
> that's attached right in front of the oil pump access
> plate

You could drill and ream for the next larger inch dowel size. I'd hate 
to leave those out.

-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]