[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] cylinder allignment


> > cylinders need to be alligned, with a special tool.

Just make sure there's an even gap to the head studs so expansion doesn't
bring the holes up against the studs, according to VW's air-cooled engine
training film.  Maybe he means the clamp to hold cylinders in place when you
remove a head to work on the valves eg., so you don't disturb the cylinders.

Dave.
UK VW Type 3 & 4 Club
http://www.hallvw.clara.co.uk/
------

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]