[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 12 Apr 2001, at 3:33, Greg Mielke wrote: > My Tranny was going together all good until I got to the Governor. My > Governor shaft has a square hole in the end of it, there was nothing in that > hole when I pulled it out of the Tranny originally. > Now, the Governor that I got from the wrecker also has this square hole > in the end. But in that square hole in a square piece of key shaft w/a round > sleeve over part of it. > I put my Goveror on the Tranny and it can be spun freely, no resistance > at all. The wrecker Governor has to be turned until that square key shaft > falls into place, and then it will only turn slightly back and forth. Sounds to me like you found your real problem! The governor must be driven by the tranny, so I think that key needs to be there. I'll take another look at the Bentley manual tonight, but I think you want to use the wrecker parts with the key-driven governor and the matching valve body. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe