[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] 64 to 69


On 6 Mar 99, at 18:26, The Albertins wrote:

> I woulo know if the front beam of a 64 Variant is compatable with 69
> front end.  I want to swap the wheel assemblys from the 69 to the 64 beam..

Yes, but you will have to use the two 69 clamp plates that hold the 
beam in place. Of course you understand that you will end up with 
disk brakes and 4-bolt wheels, too.

The later tandem master cylinder would also be necessary, or at least 
the late simplex MC that is okay for disks. You can get this, as well 
as all of the brake lines and brake light switch wiring from the same 
69.

Jim
-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]