[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: Oil Cooler: Type 3 Engine


In a message dated 6/26/99 7:07:49 AM Pacific Daylight Time, 
akatieh@jhunix.hcf.jhu.edu writes:

<< Steven wrote: "Sorry, no, wrong. T1 coolers are completely different,
 and the T3 does not put anything between the case and the cooler but the
 seals.  >>

i dont believe this is correct.  i have two different manuals and both of 
them show that there NEEDS to be small washers put on the oil cooler studs so 
that you do not over tighten the nuts thus crushing the seals and blocking 
flow to the cooler.  look it up.

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]