[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Pending front end work


The UK cars seem to be this way.. my 72, a UK LHD car here in the US was
this way.

Keith


----------
> From: Dave Hall <dave@hallvw.clara.co.uk>
> To: type3@vwtype3.org
> Subject: Re: [T3] Pending front end work
> Dwnesday, July 28, 1999 7:57 AM
> 
> Some ball-joints have a plastic plug in the top; they break rather
easily,
> but if you successfully unscrew the plug, you can fit a grease nipple in
> the taper thread there.
> 
> Dave.
> UK VW Type 3&4 Club
> http://www.hallvw.clara.net/
> ----- Original Message -----
> From: Jim Adney <jadney@vwtype3.org>
> To: <type3@vwtype3.org>
> Sent: 28 July 1999 03:26
> Subject: Re: [T3] Pending front end work
> 
> 
> > On 27 Jul 99, at 12:26, everettb@prodigy.net wrote:
> > > 2. I noticed my tie rod ends and my upper ball joints do not have
> grease
> > > fittings, can these be added or should I purchase a needle attachment
> for
> > > my grease gun and puncture away?
> 
> 
> -------------------------------------------------------------------
> Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]