[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Transmission questions


Spacers go on the TUBE, not the cable.  Mine has what seems to be
aluminum washers, and only a couple, but it's been a while since I've
been in there.  I'd say anything that fits and gets the proper sag to
the tube would do the job.  Washers are cheap.

On Mon, 26 Jul 1999 00:20:52 -0400, you wrote:

>Forgive the ignorance, but what exactly do they mean when they say
>"spacers" to put between the clutch arm and the clutch tube? Can I just
>use steel washers? Theres a spacer already there, but its a cylindrical
>piece of metal about 1/2" and it looks like it has an i.d. of about 3/8"
>does the spacer I need have to be the same dimension? Or does the spacer
>only go over the clutch CABLE, thus making it ok to use a washer with a
>1/4" i.d?
>I like to know EXACTLY what I need before starting any work, so any help
>would be appreciated. There's nothing worse than being in the middle of
>a job and realizing you have the wrong part.
>
>
>
>----------<-------------------------------------------------
>Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]