[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Lowering and raising the suspension


If you need an extra 6 inches, just removing the two lower screws under the
front of the rear fender will get you that.  It's also enough to get some
wax rust prevention fluid sprayed behind tw&r.

Dave.
UK VW Type 3&4 Club
http://www.hallvw.clara.net/
----- Original Message -----
From: Jim Adney <jadney@vwtype3.org>
To: <type3@vwtype3.org>
Sent: 23 July 1999 04:08
Subject: Re: [T3] Lowering and raising the suspension


> > => do I have to open the covers in the body to get the torsion bar
moved
> > => enough?
> >
> > Usually not. The body holes are there for actual removal of the bars.
(If
> > you eventually need to do this you can drop the subframe instead.)
>
> I had to remove the covers on a swing axle. Are things enough
> different on the IRS that you don't?
>


-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]