[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Oops, I see I reversed "inner" and "outer" in the addendum below. I have revised this to read correctly. On 8 Jul 99, at 20:21, Jim Adney wrote: > > On 7 Jul 99, at 21:12, SXTY8SQBAK@aol.com wrote: > > > > > How easy or hard is it to change the front wheel bearings on a 68 Squareback? > > > > In general this is pretty easy, but you should be aware that there > > was a mid year change in the inner wheel bearings in 68. so make sure > >ّرعز u get the right ones. > > I should add that this means that if you have a 68 then you need to > take your VIN with you when you buy replacement inner front wheel > bearings. If your FLAPS doesn't ask you about the VIN then you should > inquire why not, because their information may not be complete and > this can leave you with the wrong bearing. > > The ID of the later inner bearing is 2mm larger than the earlier > bearing. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/