[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Wheel bearings


If you have trouble getting the races in, you can put them in the freezer
first to shrink 'em down a bit. Or, you can heat the rotors in the oven to
about 150 degrees.

<<<<<<<<<<<<<<<
Nathan Jacobsen
'62 NB
'69 SB M/T
ICQ #38633286
>>>>>>>>>>>>>>>


> In a message dated 7/7/99 7:53:50 PM Pacific Daylight Time,
> syncroman@wa.freei.net writes:
>
> > Removing the bearing race is the most difficult part of this task.
>
> i'd say it would be nigh on impossible. i put new ones into new rotors,
and
> they're never ever coming back out without destroying the races and the
> rotors. and yes, i did put them in straight.
•ăNy
>
> -------------------------------------------------------------------
> Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe
>
>



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]