[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Wheel bearings


Easy.  Make sure you get the seals BEFORE you start to work, though.
Bearings and seals are still readily available, relatively cheap.  No
special presses or machine work needed, just a rawhide mallet and a
punch.  A seal and bearing driver helps to get things in straight but
I've used a big socket to do that in the past with no problems.
Bentley's got the torque specs and setup for the bearings.  A shoiHƪnoon's work, unless you need to turn rotors.

On Wed, 7 Jul 1999 21:12:27 EDT, you wrote:

>How easy or hard is it to change the front wheel bearings on a 68 Squareback?
>
>Thanks for any info.
>
>Greg
>68 Square
>
>-------------------------------------------------------------------
>Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]