[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] T3 Wheel Bearing Adjustment


This is how I've been doing it for years now.....  works for me !!!

Steven Ayres wrote:

> Make sure everything's clean and well greased. Tighten down the nut,
> then stick your big screwdriver in there and put some lateral teœ.·Î
> the washer. Back off on the nut until the washer just starts to move. Do
> this three or four times until you're sure it's right. Don't forget to
> tighten up the nut tensioner with your 6mm hex wrench afterward to make
> sure it stays there.
>
> I'll be very interested to see what other members have to stay about this.

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]