[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] carb rebush


I not sure of the condition it produces but its not good. You can never
truly balance them in this condition. The price to bush sounds right as
well as your assumtion on how its done. It gota be true! My friend who
does mine made a special jig for his drill press. Good luck!
late
jason

Ginger D.&Peter P. wrote:

>     Both stock Solex 32 PDSIT's are leaking gas at the throttle
> shaft/body.  I have two quetions
> 1) Will this cause my rich condition/slight plug fouling/poor mileage,
> or will it create lean condition?
> 2) A recommended shop that has done these carbs before quoted $80 to
> rebush both.  I have access to an accurate mill and lathe though.
> What skill/risk/special tools are required?  I assume it needs to be
> drilled oversize (straight and true) and than a brass bushing pressed
> in.
>
> Merci, (Mercy!)
> Peter Parker
> '66 Square; Phillip
> Portland, OR
>
> -------------------------------------------------------------------
> Search old messages on the Web!  Visit http://www.vwtype3.org/list/




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]