[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

lowering


I have recently completed lowering my '66 square, and it was fairly
simple. Toby gave me the best advice, to buy a Haynes or Bentley manual,
as it describes everything except the rotation of the torsion arm upward
a number of splines to lower. I rotated two splines and got an approx 1"
drop. It took me about five hours to complete, and I suggest taking the
spindle off of the mount for the ball joints instead of removing the
steering arm to get the torsion bar loose and out of the housing. Just
pay attention, be clean, and do one side at a time, and you shouldn't run
into any big problems.
Nathaniel M.
'66 square

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]