[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: Pressured Sensor



First off.. to everyone..

NEVER touch the adjustment screw in the pressure sensor unless you have and
exaust gas analyser or other proper equiptment to set the mixture up correctly.
OK.. CW is leaner but if you go too lean it will run great until you burn
a hole in #3 piston or break something from detonation.  The 71 pressure sensors
are VERY fragile and shouldn't be opened on a hunch. they are also very hard to
get.

Jerkey acceleration is eather dirty contacts in the throttle position switch,
a reversed connector to the trigger points (yes you CAN jamb in it backwards!)
or reversed injector pairs.

Keith


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]