[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
...The later one is stronger. It's too bad your late spindle is not the left |one, because that is the one that is hollow (is drilled to pass the speedo cable.) The later |spindles are more desirable, but in general you will probably never |be able to tell the difference, other than needing to be more careful |to remember that you need some different parts for the two sides. Thanks for the advice...I think I will go back later on and get the other side. |I worked on an early 68 a few years ago where the owner complained |that the car "wandered" on the road. I could not get the wheel |bearing to adjust, too much play, and finally discovered that someone |had installed a large, late bearing on the small, early spindle on |one side only. This came as a big surprise, but replacing the |bearing with the right one made a BIG difference. |Jim Those wheel bearings are very strong...the ones I took out seems to be in good shape...I kept mine just in case you know. Luis